Dwuosiowy zawias dynamometryczny ze stali nierdzewnej | 360° Free-Stop | Wytrzymały uchwyt do ekranów i paneli

The rotation axis provides 3.0 N·m for horizontal swivel, while the tilt axis delivers up to 7.0 N·m to carry the primary load. For a typical 24″ industrial monitor (6–9 kg), this leaves a comfortable static margin against drift under vibration or power loss. As a rule of thumb, calculate torque from the screen’s center of gravity to the mounting face, then add at least 20% safety margin.

An internal friction mechanism self-locks instantly at any position — no stoppers or tools needed. The 360° rotation handles portrait/landscape switching and full fold-back, while the 200° opening covers fully closed to flat-open in a single range. For cabinet door installations, simply confirm clearance at maximum opening before mounting to avoid structural interference.

The stainless steel body resists repeated wiping with alcohol and chlorine-based disinfectants, making it suitable for high-hygiene environments such as operating rooms and ICUs. If your facility requires a specific IP rating or medical device cleanliness certification, request the material certificate (e.g., SUS 304/316 specification sheet) and surface treatment documentation from the supplier for inclusion in equipment records.

Some gradual friction loss is normal with cumulative cycles; in non-corrosive environments, however, the stainless steel construction typically endures tens of thousands of operations. If the panel begins to drift, a technician can adjust pre-load or swap friction pads per the product manual — no full unit replacement required. A six-month locking-force check is generally sufficient.

Standard VESA 75×75 mm and 100×100 mm patterns are supported out of the box. For non-standard enclosures, share mounting face drawings at the RFQ stage — suppliers can typically provide adapter plates or revised hole spacing. At volume, OEM/ODM surface finishes such as custom coating or plating are usually negotiable.